Operation CHARM: Car repair manuals for everyone.

Fuel Tank Fuel Pump Module Replacement




Fuel Tank Fuel Pump Module Replacement

Special Tools

EN-48279 - Remover/Installer

Refer to Special Tools (Diagnostic Tools) Tools and Equipment.

Removal Procedure

Warning:
Refer to Gasoline/Gasoline Vapors Warning Service Precautions.


1. Remove the fuel tank. Refer to Fuel Tank Replacement Fuel Tank Replacement.





2. Disconnect and unclip the fuel tank fuel pump module wiring harness from the fuel tank pump module (2) and fuel tank pressure sensor (3).





3. Disconnect the fuel tank feed pipe from the fuel tank fuel pump module (1). and fuel tank retainer. Refer to Plastic Collar Quick Connect Fitting Service Procedures.





Note:
Do NOT use impact tools. Significant force will be required to release the lock ring. The use of a hammer and screwdriver is not recommended. Secure the fuel tank in order to prevent fuel tank rotation.

4. Install the EN-48279 - remover/installerto the fuel pump module lock ring (2)

5. Using the EN-48279 - remover/installerand a long breaker-bar, rotate the fuel pump module lock ring (2) in a counter clockwise direction in order to unlock the fuel pump module lock ring.





6. Remove the fuel tank module (1) and the O-ring (2).

Installation Procedure





1. Install a NEW seal (2) and the fuel tank module (1).





2. Using the EN-48279 - remover/installer(1) and a long breaker-bar, rotate the fuel pump module lock ring (2) in a clockwise direction in order to lock the fuel pump module lock ring (2).





3. Connect the fuel tank feed pipe to the fuel tank fuel pump module (1). and fuel tank retainer. Refer to Plastic Collar Quick Connect Fitting Service Procedures.





4. Connect and clip the fuel tank fuel pump module wiring harness to the fuel tank pump module (2) and fuel tank pressure sensor (3).

5. Install the fuel tank. Refer to Fuel Tank Replacement Fuel Tank Replacement.