Transmission Rear Mount Replacement

Transmission Rear Mount Replacement

Removal Procedure

1. Remove the catalytic converter. Refer to Catalytic Converter Replacement (LFW-Front Side) Catalytic Converter Replacement (LFW-Front Side)Catalytic Converter Replacement (LFW-Rear Side) Catalytic Converter Replacement (LFW-Rear Side)Catalytic Converter Replacement (LE9) Catalytic Converter Replacement (LE9)

2. Install the engine support fixture. Refer to Engine Support Fixture Engine Support Fixture





3. Remove the transmission mount to bracket through bolt (1).





4. Remove the transaxle brace bolt (1), then loosen bolt (2) until it no longer engages the transaxle.

5. Remove the transaxle brace (3) with bolt (2) still retained in the brace.





6. Remove the transmission mount to transmission bolts (2).





7. Remove the rear mount to frame fasteners (1, 2), then remove the mount from the vehicle. You can only remove the rear mount with the rear bracket, then a disassemble is possible.

Installation Procedure





Caution:
Refer to Fastener Caution Fastener Caution.

1. Position the transmission mount with the transmission mount bracket.

2. Install the transmission mount to transmission bolts (2) and tighten to 100 Nm (74 lb ft).





3. Install the transaxle brace (3) with bolt (2) seated in the brace.

4. Install the transaxle brace bolt (1) and tighten to 50 Nm (37 lb ft).

5. Tighten the brace bolt (2) to 100 Nm (74 lb ft).





6. Install the transmission mount to bracket through bolt (1) and tighten to 105 Nm (77 lb ft).





7. Install the rear mount to frame fasteners (1, 2) and tighten to 100 Nm (74 lb ft) plus 120-130 degrees.

8. Lower the vehicle.

9. Remove the engine support fixture. Refer to Engine Support Fixture Engine Support Fixture

10. Install the catalytic converter. Refer to Catalytic Converter Replacement (LFW-Front Side) Catalytic Converter Replacement (LFW-Front Side)Catalytic Converter Replacement (LFW-Rear Side) Catalytic Converter Replacement (LFW-Rear Side)Catalytic Converter Replacement (LE9) Catalytic Converter Replacement (LE9)