Valve Cover: Service and Repair

Camshaft Cover Replacement

Removal Procedure

1. Open the hood.

2. Remove the ignition coil. Refer to Ignition Coil Replacement Service and Repair.





3. Unclip the ECM wiring harness guide (1) from the cylinder head cover.

4. Disconnect the wiring guide (2).

5. Remove the positive crankcase ventilation tube. Refer to Positive Crankcase Ventilation Hose/Pipe/Tube Replacement Service and Repair.





6. Remove the 11 bolts (2, 3).

7. Remove the camshaft cover (1).

Installation Procedure





1. Install the camshaft cover (1).

Insert a NEW gasket in the cylinder head cover.

Caution:
Refer to Fastener Caution Fastener Caution.

2. Install the 11 bolts (2, 3) and tighten to 8 Nm (71 lb in).

3. Install the positive crankcase ventilation tube. Refer to Positive Crankcase Ventilation Hose/Pipe/Tube Replacement Service and Repair.





4. Clip in the ECM wiring harness guide (1) to the cylinder head cover.

5. Connect the wiring guide (2).

6. Install the ignition coil. Refer to Ignition Coil Replacement Service and Repair.

7. Close the hood.