Fuse Block Replacement

Fuse Block Replacement

Removal Procedure

1. Disconnect battery negative cable. Refer to Battery Negative Cable Disconnection and Connection Battery Negative Cable Disconnection and Connection.





2. Unlock the retaining tab (1) on the battery fuse box cover.

3. Use a suitable screwdriver (2) to unlock the clip (4) through the window (3).





Note:
Pull the battery fuse box housing. DO NOT pull the flap.

4. Open the battery fuse box cover (1).

5. Remove the positive battery cable to starter nut (2).

6. Remove the positive battery cable to starter (3) from the battery.

7. Remove the positive battery cable. Refer to Battery Positive Cable Replacement Battery Positive Cable Replacement.





8. Remove 2 body wiring harness nuts (1) and body wiring harness.

9. Remove fuse block (2).

Installation Procedure

1. Install fuse block.

Caution:
Refer to Fastener Caution Fastener Caution

2. Install body wiring harness and 2 body wiring harness nuts and tighten to 4.7 Nm (42 lb in).

3. Install the positive battery cable. Refer to Battery Positive Cable Replacement Battery Positive Cable Replacement.





4. Install the positive battery cable to starter (3).

5. Install the positive battery cable to starter nut (2) and tighten to 9 Nm (80 lb in).





6. Close the battery fuse box cover and lock the retaining tabs (1) and (4).

7. Connect battery negative cable. Refer to Battery Negative Cable Disconnection and Connection Battery Negative Cable Disconnection and Connection.