Transmission Mount Bracket Replacement - Rear

Transmission Mount Bracket Replacement - Rear

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle Service and Repair.

2. Using a suitable jack stand, support the rear of the transmission.





3. Remove the rear transmission mount bracket to rear mount through bolt (1).





4. Remove the 3 rear transmission mount bracket to transmission bolts (1).

5. Remove the rear transmission mount bracket (2).

Installation Procedure





1. Install the rear transmission mount bracket (2).

Caution:
Refer to Fastener Caution Fastener Caution.

2. Install the 3 rear transmission mount bracket to transmission bolts (1) and tighten to 100 Nm (74 lb ft).





3. Install the rear transmission mount bracket to rear mount through bolt (1) and tighten to 100 Nm (74 lb ft).

4. Remove the jack stand.

5. Lower the vehicle.