Manual Transmission Shift Lever and Selector Lever Cable Replacement

Manual Transmission Shift Lever and Selector Lever Cable Replacement

Removal Procedure

1. Remove transmission control. Refer to Transmission Control Replacement Transmission Control Replacement.

2. Remove battery tray. Refer to Battery Tray Replacement Service and Repair.





3. Using a suitable pry tool, carefully remove shift lever and selector lever cable (2) from transmission control housing (3).

4. Remove shift lever and selector lever cable from shift lever and selector lever cable bracket (1).





5. Remove shift lever and selector lever cable (1) from bulkhead.

6. Remove shift lever and selector lever cable from inside the engine compartment.

Installation Procedure





1. Install shift lever and selector lever cable from inside the engine compartment.

2. Install shift lever and selector lever cable (1) to bulkhead.





3. Install shift lever and selector lever cable (2) to shift lever and selector lever cable bracket (1).

4. Install shift lever and selector lever cable to transmission control housing (3).

5. Install transmission control. Refer to Transmission Control Replacement Transmission Control Replacement.

6. Install battery tray. Refer to Battery Tray Replacement Service and Repair.