Operation CHARM: Car repair manuals for everyone.

Range Selector Lever Cable Replacement (Floor Shift)




Range Selector Lever Cable Replacement (Floor Shift)

Removal Procedure

Warning:
Refer to Automatic Transmission Range Selector Cable Warning Automatic Transmission Range Selector Cable Warning.


1. Remove the air cleaner assembly from the vehicle. Refer to Air Cleaner Assembly Replacement Air Cleaner Assembly Replacement.





2. Remove the automatic transaxle range selector cable (2) from the automatic transaxle range selector lever (6).

3. Press the locking tabs (1) inward in order to release the range selector lever cable (2) from the cable bracket (3).

4. Remove the automatic transaxle range selector cable (2) from the automatic transaxle range selector cable bracket (3).

5. Remove the front floor console. Refer to Front Floor Console Replacement Front Floor Console Replacement.

6. Pull the carpet back to expose the automatic transaxle range selector cable. Refer to Floor Panel Carpet Replacement (Impala) Floor Panel Carpet Replacement (Impala).





7. Remove the automatic transaxle range selector cable retainer (1) from the Transmission control assembly.

8. Disconnect the cable terminal (3) from the transmission control shift lever pin (4).

9. Remove the automatic transaxle range selector cable (2) from the console shift control.

10. Install a piece of mechanics wire to the end of the automatic transmission range selector cable.





11. Remove the automatic transmission range selector cable and grommet (1) through the hole in the cowl.

Installation Procedure

Warning:
Refer to Automatic Transmission Range Selector Cable Warning Automatic Transmission Range Selector Cable Warning.


1. Install the automatic transmission range selector cable through the hole in the cowl.





2. Seat the grommet (1) in the cowl.

3. Remove the mechanics wire from the end of the automatic transmission range selector cable.





4. install the automatic transaxle range selector cable (2) to the transmission control assembly.

5. Install the automatic transaxle range selector cable terminal (3) to the transmission control shift lever pin (4).

6. Install the automatic transaxle range selector cable retainer (1) to the console shift control.

7. Install the carpet into position. Refer to Floor Panel Carpet Replacement (Impala) Floor Panel Carpet Replacement (Impala).

8. Install the front floor console. Refer to Front Floor Console Replacement Front Floor Console Replacement.

9. Properly route and position the automatic transmission range selector cable in the engine compartment.





10. Install the automatic transaxle range selector cable (2) to the automatic transaxle range selector cable bracket (3).

11. Install the automatic transaxle range selector cable (2) to the automatic transaxle range selector lever (6).

12. Adjust the automatic transaxle range selector cable. Refer to Range Selector Lever Cable Adjustment Adjustments.

13. Install the air cleaner assembly in the vehicle. Refer to Air Cleaner Assembly Replacement Air Cleaner Assembly Replacement.