Engine Oil Dip Stick - Dip Stick Tube: Service and Repair

Oil Level Indicator Tube Replacement

Removal Procedure

Note: If the engine oil level is at maximum, some oil may emerge when drawing out the oil dipstick guide tube.

1. Place collecting basin underneath.




2. Remove the oil level indicator tube bolt (1).

3. Remove the oil level indicator tube (2).

Installation Procedure





Note: Use a NEW oil level indicator tube seal

1. Install the oil level indicator tube (2).

Caution: Refer to Fastener Caution Fastener Caution.

2. Install the oil level indicator tube bolt (1) and tighten to 15 Nm (11 lb ft).

3. Check the oil level and adjust as necessary.