Horn: Service and Repair

REMOVAL PROCEDURE

1. Remove the front grille. Refer to Grille Replacement in Exterior Trim.
2. Disconnect the horn electrical connectors (1).
3. Remove the mounting bolt and the horn (2) from the vehicle.

INSTALLATION PROCEDURE

NOTICE: Refer to Fastener Notice in Cautions and Notices.

1. Install the horn to the vehicle. Secure the horn with the mounting bolt.

Tighten
Tighten the bolt to 10 N.m (89 lb in).

2. Connect the horn electrical connectors (1).
3. Install the front grill to the vehicle.