Third Pillar Trim Replacement - Right Side

Third Pillar Trim Replacement - Right Side

Tools Required

J 38778 Door Trim Pad and Garnish Clip Remover.

Removal Procedure

1. Remove the C- pillar retaining screw.




2. Use the J 38778 in order to release the fasteners that retain the panel to the vehicle.

Installation Procedure




1. Install the panel to the vehicle:

1. Align the C- pillar retaining clips with the holes in the body.
2. Press the panel in order to seat the fasteners into place.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the C- pillar retaining screw.

Tighten the C- pillar retaining screw to 2 Nm (18 lb.in.).