Trim Panel Replacement - Body Side Front Lower

Trim Panel Replacement - Body Side Front Lower

Tools Required

J 38778 Door Trim Pad and Garnish Clip Remover


Removal Procedure

1. Remove the intermediate seat. Refer to Seat Replacement - Rear Bench (Seat Replacement - Rear Bench) in Seats.
2. Remove the driver's door stepwell lamp cover retaining screw.
3. Remove the stepwell lamp assembly from the body side lower storage pocket.




4. Use the J 38778 in order to remove the body side front lower trim panel from the vehicle.



Installation Procedure





1. Install the body side front lower trim panel to the vehicle:

1. Align the fasteners.
2. Snap the fasteners into place.

2. Install the driver's door stepwell lamp assembly to the body side lower storage pocket.

Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install the stepwell lamp cover retaining screw.

Tighten the stepwell lamp cover retaining screw to 2 N.m (18 lb in).

4. Install the intermediate seat. Refer to Seat Replacement - Rear Bench (Seat Replacement - Rear Bench) in Seats.