Seat Cushion Cover Replacement - Front (YC5 and YC6)

Seat Cushion Cover Replacement - Front (YC5 and YC6)

Removal Procedure

1. Remove the bucket seat from the seat risers. Refer to Seat Replacement - Bucket (Seat Replacement - Bucket) .




2. Remove the screw from the recliner lever handle if equipped.
3. Remove the lever from the recliner if equipped.
4. Remove the lumbar knob and clip if equipped.
5. Remove the J-hooks that retain the seat cushion cover to the seat cushion frame.

Important: Note the positions of the hog rings for reassembly.






6. Remove the hog rings that retain the seat cushion cover to the seat cushion frame.




7. Remove the seat cushion cover and pad from the seat cushion frame.
8. Remove the seat cushion cover from the pad.



Installation Procedure





1. Install the seat cushion cover to the pad.
2. Install the seat cushion cover and the pad to the seat cushion frame.




3. Install the hog rings that retain the seat cushion cover to the seat cushion frame in the locations noted during disassembly.
4. Install the J-hook that retain the seat cushion cover to the seat cushion frame.




5. Install the lumbar knob and clip if equipped.
6. Install the lever to the recliner if equipped.

Notice: Refer to Fastener Notice in Cautions and Notices.

7. Install the screw to the recliner lever handle if equipped.

Tighten the screw to the recliner lever handle to 2 N.m (18 lb in).

8. Install the bucket seat to the seat risers. Refer to Seat Replacement - Bucket (Seat Replacement - Bucket) .