Seat Cushion Cover and Pad Replacement - Rear

Seat Cushion Cover and Pad Replacement - Rear

Removal Procedure

1. Remove the bench seat and risers from the vehicle. Refer to Seat Replacement - Rear Bench (Seat Replacement - Rear Bench) .
2. Remove the right and left sides of the seat back hinge trim. Refer to Seat Back Hinge Trim Replacement - Rear Right (YC6) (Seat Back Hinge Trim Replacement - Rear Right (YC6)) and Seat Back Hinge Trim Replacement - Rear Left (Seat Back Hinge Trim Replacement - Rear Left) .

Important: Note the position and length of the bolts you remove. This will assist with reassembly.






3. Remove the bolts retaining the seat back hinges to the seat cushion frame.




4. Remove the J-hooks that retain the seat cushion cover to the seat cushion frame.

Important: Note the locations of the hog rings for reassembly.






5. Remove the hog rings that retain the seat cushion cover to the seat cushion frame located at the rear edge of the seat frame.




6. Remove the seat back cushion cover and pad from the seat cushion frame.

Important: Note the locations of the hog rings for reassembly.






7. Remove the hog rings that retain the seat cushion cover to the seat cushion pad located under the seat cushion cover.
8. Remove the seat cushion cover from the seat cushion pad.



Installation Procedure

1. Install the seat cushion cover to the seat cushion pad.




2. Install the hog rings that retain the seat cushion cover to the seat cushion pad located under the seat cushion cover.




3. Install the seat back cushion cover and pad to the seat cushion frame.




4. Install the hog rings that retain the seat cushion cover to the seat cushion frame located at the rear edge of the seat frame.




5. Install the J-hooks that retain the seat cushion cover to the seat cushion frame.





Notice: Refer to Fastener Notice in Cautions and Notices.

6. Install the bolts that retain the seat back hinges to the seat cushion frame.

Tighten the bolts that retain the seat back hinges to the seat cushion frame to 30 N.m (22 lb ft).

7. Install the right and left sides of the seat back hinge trim. Refer to Seat Back Hinge Trim Replacement - Rear Right (YC6) (Seat Back Hinge Trim Replacement - Rear Right (YC6)) and Seat Back Hinge Trim Replacement - Rear Left (Seat Back Hinge Trim Replacement - Rear Left) .
8. Install the bench seat and risers in the vehicle. Refer to Seat Replacement - Rear Bench (Seat Replacement - Rear Bench) .