Ignition Coil: Service and Repair

Ignition Coil Replacement

Removal Procedure

1. Remove the engine cover. Refer to Engine Cover Replacement Service and Repair.





2. Disconnect the spark plug wires at the ignition coils.





3. Disconnect the ignition coil harness connector.





4. Remove the ignition coil mounting bolts.





5. Remove the ignition coil.

Installation Procedure





1. Install the ignition coil to the bracket.





Caution:
Refer to Fastener Caution Fastener Caution.

2. Install the ignition coil mounting bolts and tighten to 8 Nm (71 lb in).





3. Connect the ignition coil harness connector.





4. Connect the spark plug wires at the ignition coils.

5. Install the engine cover. Refer to Engine Cover Replacement Service and Repair.