Air Cleaner Fresh Air Duct/Hose: Service and Repair

Air Cleaner Outlet Resonator Replacement

Removal Procedure




1. Disconnect the positive crankcase ventilation (PCV) hose (1) from the air cleaner outlet resonator.




2. Loosen the air cleaner outlet resonator clamp (1) at the mass air flow (MAF)/intake air temperature (IAT) sensor.
3. Loosen the air cleaner outlet resonator clamp (2) at the throttle body.
4. Remove the air cleaner outlet resonator from the throttle body and the MAF/IAT sensor.

Installation Procedure




1. Install the air cleaner outlet resonator to the MAF/IAT sensor and throttle body.

Caution: Refer to Fastener Caution Fastener Caution.

2. Tighten the air cleaner outlet resonator clamp (2) at the throttle body.

Tighten the clamp to 4 Nm (35 lb in).

3. Tighten the air cleaner outlet resonator clamp (1) at the MAF/IAT sensor.

Tighten the clamp to 4 Nm (35 lb in).




4. Connect the PCV hose (1) to the air cleaner outlet resonator.