Battery Tray Replacement

Battery Tray Replacement

Removal Procedure
Warning: Refer to Battery Disconnect Warning Service Precautions.





1. Remove the battery. Refer to Battery Replacement Removal and Replacement.
2. Reposition the positive and negative battery cables out of the way.
3. Remove the battery tray to battery tray reinforcement bolts (1).
4. Remove the battery tray to battery tray support bolts (2).
5. Remove the battery tray to auxiliary bussed electrical center (BEC) bolt (4).
6. Remove the battery tray (3).

Installation Procedure




1. Install the battery tray (3) into the vehicle.

Caution: Refer to Fastener Caution Fastener Caution.

2. Install the battery tray to battery tray reinforcement bolts (1) and tighten to 9 Nm (80 lb in).
3. Install the battery tray support bolts (2) and tighten to 9 Nm (80 lb in).
4. Install the battery tray to auxiliary BEC bolt (4) and tighten to 9 Nm (80 lb in).
5. Install the positive and negative battery cables.
6. Install the battery. Refer to Battery Replacement Removal and Replacement.