U1415

U1415-IMPLAUSIBLE/MISSING VEHICLE CONFIGURATION DATA

WHEN MONITORED
With the ignition on. The ORC on board diagnostics loads the ORC Configuration Data from the Totally Integrated Power Module (TIPM) CAN Bus message.

SET CONDITION
This DTC will set if the CAN Bus message was received but the information is invalid or corrupt.

POSSIBLE CAUSES
- Totally Integrated Power Module (TIPM)

TOTALLY INTEGRATED POWER MODULE FAILURE

Turn the ignition on.
With the scan tool, read TIPM DTCs.

Q: Does the scan tool display any TIPM DTCs?

YES: Select appropriate symptom from Symptom List. Repair all TIPM active DTCs and before diagnosing the ORC DTCs.

NO: Replace the Totally Integrated Power Module (TIPM). Perform ORC VERIFICATION TEST - VER 1. Occupant Restraint Controller (ORC) Verification Test