Installation - Convertible
INSTALLATION - CONVERTIBLE
1. Place quarter trim panel into position.
2. Install screws attaching quarter trim panel.
3. Install door sill scuff plate.
4. Install turning loop anchor attaching bolt.
5. Install lower seat belt anchor at B-pillar.
6. Install bolster to rear seat back support. Rear Seat Bolster - Installation.
7. Connect J-strap at upper seat back slingwell.
8. Install rear seat lower seat belt anchor attaching bolt.
9. Install rear seat. Seat - Installation.
10. Install rear seat pivot bezels and striker bezel.
11. Install attaching screw (2) to left and right rear seat fold forward check strap.
12. Place rear seat in the upright position.