Starter Motor - Removal

2.4L TURBO





1. Disconnect the negative battery cable.
2. Remove the air cleaner box, Air Cleaner Housing - Removal.




3. Pushing the inner cooler hose up and out of the way and remove the upper starter bolt and ground wire.
4. Raise vehicle and support.




5. Remove the inner cooler lower hose from the inner cooler.




6. Remove the nuts that hold the lower inner cooler tube.




7. Remove the studs that hold the power steering lines.
8. Loosen and relocate the power steering lines.




9. Remove the Structural Collar, Removal.




10. Unlock and disconnect the solenoid electrical connector.
11. Disconnect and remove the positive battery cable.
12. Remove the lower starter bolt.
13. Remove starter.