U1414

U1414-IMPLAUSIBLE/MISSING ECU CONFIGURATION DATA



- When Monitored:
With the ignition on. The ORC on board diagnostics continuously monitors the CAN Bus message from the Totally Integrated Power Module (TIPM) containing the ORC Configuration Data.

- Set Condition:
This DTC will set if the appropriate CAN Bus message is not received by the ORC.





TOTALLY INTEGRATED POWER MODULE FAILURE
1. Turn the ignition on.
2. With the scan tool, read TIPM DTCs.

NOTE: Check the connectors - Clean and repair as necessary.

Does the scan tool display any TIPM DTCs?

Yes

- Diagnose and repair the DTCs. Testing and Inspection. Repair all TIPM active DTCs and before diagnosing the ORC DTCs.

No

- Replace the Totally Integrated Power Module (TIPM).
- Perform the BODY VERIFICATION TEST. Body Verification Test.