U1415

U1415-IMPLAUSIBLE/MISSING VEHICLE CONFIGURATION DATA



- When Monitored:
With the ignition on. The ORC on board diagnostics loads the ORC Configuration Data from the Totally Integrated Power Module (TIPM) CAN Bus message.

- Set Condition:
This DTC will set if the CAN Bus message was received but the information is invalid or corrupt.





TOTALLY INTEGRATED POWER MODULE FAILURE
1. Turn the ignition on.
2. With the scan tool, read TIPM DTCs.

NOTE: Check the connectors - Clean and repair as necessary.

Does the scan tool display any TIPM DTCs?

Yes

- Diagnose and repair the DTCs. Testing and Inspection. Repair all TIPM active DTCs and before diagnosing the ORC DTCs.

No

- Replace the Totally Integrated Power Module (TIPM).
- Perform the BODY VERIFICATION TEST. Body Verification Test.