B-Pillar Trim Panel - Installation

INSTALLATION










NOTE: Tighten all seat belt bolts to 40 Nm (30 ft. lbs.)

1. Align height adjuster to hole in B-pillar slider.
2. Install upper B-pillar trim (3).
3. Position lower B-pillar trim panel near B-pillar (1).
4. Feed seat belt turning loop and seat belt through trim panel.
5. Align locating pins on backside of trim panel to mating holes in B-pillar (1).
6. Push clips on trim panel into slots in B-pillar (1).
7. Install access cover to B-pillar trim.
8. Install bolt attaching turning loop to belt adjuster.
9. Install shoulder belt height control knob.
10. Install bolt attaching lower seat belt anchor to floor pan kick-up.
11. Install front and rear door sill trim.