P0341

Tests 1 - 3:

Tests 4 - 9:

Tests 10 - 14:

Test 15:

SYMPTOM
P0341 - CAMSHAFT POSITION (CMP) SENSOR SIGNAL

WHEN MONITORED
Engine running.

SET CONDITION
The Camshaft Position Sensor indicates no engine speed or position signal to ECM

POSSIBLE CAUSES
- DTC not equal to freeze frame DTC
- CMP ground circuit open
- CMP wiring harness intermittent defect
- Camshaft Position Sensor
- Gear
- 5 volt supply circuit open
- 5 volt supply circuit shorted to ground
- CMP sensor signal circuit open
- CMP sensor signal circuit shorted to ground
- Engine Control Module (5 volt supply)
- Engine Control Module (signal circuit)