Power Liftgate Link Rod - Removal

REMOVAL






CAUTION: Lift the clips (1) only enough to release the link rod (2) from the ball stud (3).







WARNING: Never attempt to operate the power liftgate system when the link rod is removed or disconnected. Damage to the power liftgate system will result.

1. Open the liftgate.
2. Using a small flat bladed tool (3), or equivalent, release the retaining clip (2) while pulling the ball socket (1) away from the ball stud (4).





3. Remove the link rod (2) from the liftgate ball stud (1).





4. NOTE: In the event the liftgate ball stud becomes worn or damaged it may be replaced. Refer to the following procedure for ball stud replacement.
Using the appropriate sized socket, remove the ball stud (2) from the liftgate (1).