Kneeblocker - Removal

REMOVAL





1. Before proceeding with the following repair procedure, review all warnings and cautions. Service Precautions
2. Position the steering column into the highest position to ease in the removal of the steering column cover. Reach into the steering column opening at the top of the steering column cover and pull the top rearward to disengage cover blocker clips.
3. Gently swing the cover open.
4. While the cover is in a full down position, slide the cover to the left or outboard of the driver side, this will allow the claws of the cover to disengage from the trim panel hinges, and then pull the cover rearward to remove the steering column cover.