Steering Column Opening Cover - Removal

REMOVAL





1. Before proceeding with the following repair procedure, review all warnings and cautions. Service Precautions
2. Using a trim stick C-4755 or equivalent, separate the end cap retaining clips and remove the end cap.










3. Pull the park brake release handle (1) out, release the clip (2) and disconnect the release rod (3).





4. Remove the two screws (3).
5. Using a trim stick C-4755 or equivalent, separate the upper retaining clips (1) and remove the opening cover (2).





6. Release the side tabs and separate the diagnostic connector (1) from the opening cover reinforcement (2).





7. Remove the screws (4) and separate the hood release handle (1) from the opening reinforcement.





8. Remove the two screws (1).
9. Using a trim stick C-4755 or equivalent, separate the upper retaining clips and remove the opening cover reinforcement (2).