Front

REMOVAL

NOTE: Front Seats for detailed exploded views.

NOTE: All call outs are in reference to the Driver Power exploded view unless otherwise noted.

1. Remove the seat from the vehicle. Seat - Removal.
2. Remove the lift handle cover (24 - Driver Manual) and mounting fasteners (26 - Driver Manual), if equipped.
3. Remove the lift handle (23 - Driver Manual), if equipped.
4. Carefully pry the side shield away from the recliner handle (26) and remove the retaining clip.
5. Remove the recliner handle.
6. Remove the rear fastener (31) from the outboard shield (25).
7. Starting at the rear of the outboard shield, carefully pry the side shield until the retainers disengage and slide the shield forward to remove.
8. Remove the seat buckle bolt and buckle (40).
9. Remove the rear fastener (31) from the inboard shield (42).
10. Starting at the rear of the inboard shield, carefully pry the side shield until the retainers disengage and slide the shield forward to remove.
11. Remove the airbag wiring harness (24) from the seat bottom, ensure the harness is completely removed from the bracket (26) and through recliner mechanism.
12. Remove the outboard and inboard seat back bolts (30).
13. Remove the seat back from the seat cushion assembly.