Disc Brake Caliper Adapter - Removal

REMOVAL





1. Raise and support the vehicle.
2. Remove the front wheel and tire assembly.
3. Drain a small amount of fluid from master cylinder brake reservoir with a clean suction gun.
4. Bottom the caliper pistons into the caliper by prying the caliper over.
5. Remove the caliper mounting bolts (3).
6. Remove the disc brake caliper (4) from the adapter (5).

CAUTION: Never allow the disc brake caliper to hang from the brake hose. Damage to the brake hose will result. Provide a suitable support to hang the caliper securely.

7. Remove the inboard and outboard brake pads. Brake Pads - Removal.
8. Remove the caliper adapter mounting bolts (1).