Installation

INSTALLATION






NOTE: On a new vehicle or after parking brake lining replacement, it is recommended that the parking brake system be conditioned prior to use. This is done by making one stop from 25 mph on dry pavement or concrete using light to moderate force on the parking brake lever.

1. Reassemble the rear park brake shoes (1).
2. Adjust the rear brake shoes (5) Adjustments.





3. Install the axle shaft (2) Installation.
4. Install the disc brake rotor Brake Rotor - Installation.
5. Install the disc brake caliper Disc Brake Caliper - Installation.
6. Install the tire and wheel assembly Service and Repair.
7. Lower the vehicle.