Front Clevis Bracket - Installation

INSTALLATION





1. Install the clevis bracket upper bolt (2) to the shock (1). Tighten the bolt (2) to 108 Nm (80 ft.lbs.).
2. Raise the knuckle to the upper ball joint.
3. Install the nut to the upper ball joint. Tighten the nut to 41 Nm (30 ft.lbs.) plus an additional 90° turn.
4. Install the clevis bracket lower bolt (4) to the lower control arm. Tighten the bolt (4) to 150 Nm (110 ft.lbs.). with full vehicle weight.

5. Install the lower stabilizer link bolt at the lower control arm. Tighten the bolt to 102 Nm (75 ft.lbs.). with full vehicle weight.
6. Install the wheel speed sensor Front.
7. Install the disc brake rotor Brake Rotor - Installation.
8. Install the tire and wheel assembly Service and Repair.
9. Lower the vehicle.