Installation

INSTALLATION






NOTE: Muffler installation is a two-man operation. Never allow the muffler to hang from the isolators. A helper is required so no damage will come to the isolators or to the tailpipe/muffler assembly.

1. Position muffler and tailpipe (3) assembly in vehicle.
2. Install insulators (2).





3. Install bolts and nuts at front exhaust pipe/catalytic converter flange (2).
4. Make sure the muffler/tailpipe assembly is correctly positioned and the properly aligned. The minimum clearance between components is 25mm (1 inch).
5. Tighten nuts (2) to 47 Nm (35 ft. lbs.).
6. Install the ground strap (3).
7. If equipped, install skid plate Skid Plate - Installation.
8. Lower the vehicle.
9. Start the engine and inspect for exhaust leaks. Repair exhaust leaks as necessary.