Headliner - Installation

INSTALLATION





1. Position the headliner in the vehicle through the liftgate door opening.






CAUTION: Be careful not to crease the headliner.

2. Connect the headliner wire harness connectors (1) located at the D-pillars.
3. Raise the rear of the headliner upward and install the rear push pin fasteners (2).





4. Raise the front of the headliner upward and install the sun visor supports Visor - Installation.





5. If equipped, connect the illuminated vanity mirror wire harness connectors.

CAUTION: Make sure there are no wire harnesses in the way of the visor before installation.

6. Position the visors back into place and seat into the roof fully.
7. Install the mounting screws (2).





8. Install the screw cover (2) by snapping into place.





9. Connect the front electrical connector (2) and secure the wire harness (1) to the A-pillar.
10. Install the A-pillar trim panels. A-Pillar Trim Panel - Installation
11. Install the overhead console. Front Overhead Console - Installation





12. Connect the grab handle electrical connectors, if equipped.
13. Install the grab handles into the roof and seat fully.
14. Install the screws (1).
15. Position the screw covers (2) back and seat fully.





16. Install the media system monitor (2), if equipped. Media System Monitor - Installation
17. Install the upper B-pillar trim. B-Pillar Trim Panel - Installation
18. Install the C-pillar trim. C-Pillar Trim Panel - Installation
19. Install the D-pillar trim. D-Pillar Trim Panel - Installation