Quarter Trim Panel - Removal

REMOVAL

Special Tools:










1. Remove the load floor. Load Floor - Removal
2. Remove the D-pillar trim. D-Pillar Trim Panel - Removal
3. Remove the rear door scuff plate. Scuff Plate - Removal
4. Position the door seal (1) aside.






NOTE: Right side shown, left side similar.

5. Using a small flat bladed tool or equivalent, remove and discard the screw cap (3).
6. Remove the screws (4).
7. Using a trim stick or equivalent, disengage the retaining fasteners (5) that secure the quarter trim panel to the quarter panel.
8. Pull the quarter trim panel away from the quarter panel.
9. If equipped, disconnect the power outlet wire harness connector (1).
10. Remove the quarter trim panel (2).