Starter - Installation

3.6L 4X4





1. Position the starter motor to the engine.
2. Install and tighten both mounting bolts (2). Torque the bolts to 68 Nm (50 ft. lbs.).
3. Connect the solenoid wire to starter motor.
4. Position the battery cable to the solenoid stud. Install and tighten battery cable eyelet nut. Torque the nut to 25 Nm (19 ft. lbs.).
5. Install the driver side engine mount (4) Engine Mount Insulator - Installation.





6. Install the front axle (1) Installation.
7. Connect the negative battery cable.