Transmission Shifter - Installation

INSTALLATION





1. Install shifter assembly (1) in position on the floor pan.
2. Install the bolts (2) to hold the shifter assembly (1) onto the floor pan. Tighten bolts to 12 Nm (105 in.lbs.).





3. Place the floor shifter lever in PARK position.
4. Install the gearshift cable (1) to the shift lever pin.
5. Install the wiring harness connectors to the shifter assembly (2).
6. Verify that the shift lever is in the PARK position.
7. Tighten the adjustment screw to 30 Nm (265 in.lbs.).
8. Verify correct shifter, park lock, and BTSI operation.
9. If necessary, install the shield, covering the gearshift and park lock cables, to the shifter assembly and install the bolts to hold the shield to the shifter assembly.
10. Install any console parts removed for access to shift lever assembly and shift cables.Shifter Bezel - Installation.