Gas Prop - Removal

REMOVAL

Power Liftgate Support Cylinders





WARNING: Do not remove the liftgate support rods with the liftgate closed. The support rod pistons are operated by high pressure gas and could cause personal injury and/or vehicle damage if they are removed with the pistons compressed (liftgate closed). Once removed, do not attempt to disassemble or repair the support rods.

WARNING: Failure to follow these instructions may result in possible serious or fatal injury.

1. Open and support the liftgate with a suitable prop or block.
2. Locate the mount (2) for the liftgate strut (3) on the liftgate (1).





3. Using a small flat bladed tool (3), or equivalent, release the retaining clips (2) while pulling the ball socket (1) away from the ball stud (4).





4. Remove the rubber grommet (1) to gain access to the liftgate strut (3) connector.





5. Disconnect the connector (2).
6. Remove the strut (1) from the vehicle.

Non-Power Liftgate Support Cylinders





WARNING: Do not remove the liftgate support rods with the liftgate closed. The support rod pistons are operated by high pressure gas and could cause personal injury and/or vehicle damage if they are removed with the pistons compressed (liftgate closed). Once removed, do not attempt to disassemble or repair the support rods.

WARNING: Failure to follow these instructions may result in possible serious or fatal injury.

1. Open and support the liftgate with a suitable prop or block.





2. Using a small flat bladed tool (3), or equivalent, release the retaining clips (2) while pulling the ball socket (1) away from the ball stud (4).