Ignition Coil - Removal

3.6L

1. Disconnect and isolate the negative battery cable.

2. Remove the engine cover.





3. If removing the ignition coils from cylinders 2, 4 or 6 on the LH side of the engine, first remove the upper intake manifold (2) and insulator Removal and Replacement.





NOTE:
The LH ignition coils are shown, the RH ignition coils are similar.

4. Unlock and disconnect the electrical connector (1) from the ignition coil.

5. Remove the ignition coil mounting bolt (3).



6. Pull the ignition coil (2) from cylinder head cover opening with a slight twisting action.