Floor Console - Installation

INSTALLATION





1. Connect the 12V power harness (3), position and align the front floor console (4) in the vehicle.
2. Install the retaining nuts (1) located in the front cupholder cavity and in the rear of the front floor console (4). Tighten the retaining nuts securely.
3. Install the front cupholder mat (2).





4. Install the screw (1) securing the front console to lower instrument panel bezel. Tighten the screw securely. Repeat for the opposite side.





5. Position the left side floor console panel (1) and hand tap to engage the rear retaining tabs.
6. Install the screw (2) to the left side floor console panel (1). Tighten the screw securely.





7. Position the right side floor console panel (1) into the vehicle push forward to engage the retaining clip in the floor.
8. Hand tap to engage the front floor console to floor console panel retaining clips.
9. Install the screw (2) to the right side floor console panel (1). Tighten the screw securely.





10. Slide the rear floor console (1) over the parking brake handle and position into the vehicle.
11. Push the rear floor console forward to engage the front to rear floor console retaining clips/tabs.
12. Install the rear retaining nut (3) located in the rear cupholder cavity. Tighten the nut securely.
13. Install the rear cupholder mat (2).
14. Position the parking brake handle down fully.
15. Connect the negative battery cable.