Convergence Telematics Module - Removal

REMOVAL

Special Tools:










1. Disconnect and isolate the negative battery cable.
2. Using trim stick C-4755 or equivalent (3), disengage the retaining tabs that secure the control panel (1) to the A/C heater control and remove the control panel from the instrument panel (2).





3. Using trim stick C-4755 or equivalent, disengage the retaining tabs to the center trim bezel (1) and remove the bezel.





4. Remove the retainers (1) from the passenger side silencer panel (2).





5. Remove the glove box Instrument Panel Glove Box - Removal.





6. While holding the Convergence Telematic Module (CTM) (1), remove the bracket mounting retainer (2).





7. Disconnect the harness connector (1) from the CTM.





8. Disconnect the harness clip (1) from the CTM bracket (2) and remove the CTM (3).