Instrument Panel Glove Box - Installation

INSTALLATION





1. Position the glove box module (4) near the instrument panel cover and if equipped, connect any wiring harnesses.
2. Install the three screws (1) located on the top edge of the glove box module (4).
3. Install the bolt (2) located in the glove box cavity. Tighten the bolt securely.
4. Close the glove box door (3) and install the two screws securing the module to the instrument panel cover located on the bottom front edge of glove box module (4).





5. Install the center trim bezel, Service and Repair.
6. Position and align the instrument panel closeout panel (2).
7. Install the instrument panel closeout fasteners (1).