Instrument Panel Glove Box - Removal

REMOVAL





1. Remove the instrument panel closeout fasteners (1).
2. Remove the instrument panel closeout panel (2).
3. Remove the two screws located on the bottom front edge of glove box module securing the module to the instrument panel cover.





4. Remove the center trim bezel, Service and Repair.
5. Open the the glove box door and remove the bolt (2) located in the glove box cavity.
6. Remove the three screws (1) located on the top edge of the glove box module (4).
7. Pull the glove box module (4) out and if equipped, disconnect any wiring harnesses.
8. Remove the glove box module (4).