C-Pillar Trim Panel - Installation

INSTALLATION









1. Pass seat belt anchors through the C-pillar trim opening.
2. Install the C-pillar trim (1) by aligning and sliding hook at top and locating the upper retaining clips into the body side sheet metal holes.
3. Align and position the lower retaining clips and snapping until properly seated.
4. Install the fastener (2) located under the rear shelf bracket. Tighten the fastener securely.
5. Install the rear shelf.
6. Install the rear seat belt anchor at the seat, Seat Belt Retractor - Installation.
7. Install the B-pillar trim, B-Pillar Trim Panel - Installation.