Valve Guide Seals - Removal

REMOVAL






NOTE: If the springs are to be reused, identify their positions so that they can be reassembled into their original locations. Number 2 cylinder exhaust valve spring shown, all other valve springs similar.

1. Remove the valve spring(s) (2) Valve Springs - Removal.






NOTE: Number 2 cylinder exhaust valve guide seal shown, all other valve guide seals similar.

2. Remove the valve guide seal (1) using a valve seal tool (2). Discard the removed seal.






NOTE: Number 2 cylinder exhaust valve spring seat shown. Exhaust valve spring seats are marked with the letter "S" and have a thickness of 0.8 mm (0.031 in.). Intake valve spring seats are marked with the letter "A" and have a thickness of 3.2 mm (0.126 in.).

3. If required, remove the valve spring seat (1).
4. If required, remove the valve(s) Intake And Exhaust Valves - Removal.