Test A: Control Solenoids

TEST A: CONTROL SOLENOIDS

A1-A5:

A5-A8:

NOTE: Refer to the Transmission Vehicle Harness Connector illustration preceding these pinpoint tests. Transmission Connector Layouts

NOTE: Refer to the Internal Harness Connector illustration preceding these pinpoint tests. Transmission Connector Layouts

NOTE: Read and record all DTCs. All TR position Sensor and VSS DTCs must be repaired before entering Output State Control (OSC) - Service Bay Mode.

NOTE: Use the PID Chart for available diagnostic PIDs. Refer to Output State Control (OSC) Mode. Torqshift - Automatic Transmission