Speaker Walk-Around Test (ULC and M100 Audio Units)

SPEAKER WALK-AROUND TEST (ULC AND M100 AUDIO UNITS)

NOTE: The audio unit must be turned ON and in radio tuner mode (AM/FM) to enter the speaker walk-around test.

1. To enter the speaker walk-around test, press preset buttons 3 and 6 (1 and 4 for ULC only) simultaneously and hold for 3 seconds, then release.
2. The speaker walk-around test applies sound to each speaker for 1-2 seconds. Each speaker is tested and shown on the display in the following sequence: RF, LF, LR, RR.
3. The speaker walk-around test automatically continues and tests the remote compact disc (CD) changer. If the vehicle is not equipped with a remote CD changer or if the remote CD changer is not responding, NO DJ will be displayed. To exit the speaker walk-around test, turn the ignition switch OFF, turn the audio unit OFF, or press preset button 1 for "DIA".