Alarm System Transponder: Service and Repair

PASSIVE ANTI-THEFT SYSTEM (PATS) TRANSCEIVER







Removal and Installation
1. Remove the instrument panel steering column cover.
2. Remove the ignition lock cylinder.
3. Remove the 3 steering column shroud screws and the lower steering column shrouds.
4. Remove the PATS transceiver screw.
5. Remove the PATS transceiver.
- Disconnect the PATS transceiver electrical connector.

6. NOTE: No key replacement or re-initialization needs to occur with the removal or installation of a new PATS transceiver.

To install, reverse the removal procedure.