Test B: DTC 1359: No Power In ACC/Run

Pinpoint Test B: DTC 1359 No Power in ACC/RUN

Normal Operation
When placed in ACC, the ignition switch provides voltage to the SJB on circuit CDC33 (VT/GN). When placed in RUN, the ignition switch provides voltage to the SJB on circuit CDC34 (WH/OG).

Possible Causes
^ Circuit CDC33 (VT/GN) open or short to ground
^ Circuit CDC34 (WH/OG) open or short to ground
^ Ignition switch
^ SJB

CAUTION: Use the correct probe adapter(s) when making measurements. Failure to use the correct probe adapter(s) may damage the connector.

B1-B2:

B2-B4:

B5:

PINPOINT TEST B: NO POWER IN ACC/RUN