Test E: DTC C1185 - Anti-Lock Brake System (ABS) Power Relay Output Circuit Failure

PINPOINT TEST E: DTC C1185 - ANTI-LOCK BRAKE SYSTEM (ABS) POWER RELAY OUTPUT CIRCUIT FAILURE
Refer to Vehicle/Diagrams, Vehicle Dynamic Systems for schematic and connector information.

Normal Operation
The operating voltage required to supply the anti-lock brake system (ABS) module, hydraulic pump and isolation valves is in a range between 10 and 16 volts.

Voltage is supplied by the battery junction box (BJB) through circuit 532 (OG/YE) (hot at all times) and by the central junction box (CJB) through circuit 532 (OG/YE) (hot in run). Ground is provided through circuit 530 (LG/YE).

Possible Causes
^ Circuit open
^ ABS module
^ Fuse

E1-E3: