Test H: The Vehicle Does Not Start

PINPOINT TEST H: THE VEHICLE DOES NOT START

H1:

H1-H3:

Normal Operation
During each vehicle start sequence, the passive anti-theft system (PATS) transceiver reads the PATS key identification code and sends the data to the instrument cluster, which then sends a message to the powertrain control module (PCM) to enable the injectors and the starter. The PCM grounds the starter relay solenoid coil on circuit CDC12 (YE).

Possible Causes
- Circuit CDC12 (YE) open
- PATS transceiver
- PATS key
- PCM