Test M: The High Beam Indicator Is Never On

PINPOINT TEST M: THE HIGH BEAM INDICATOR IS NEVER ON

Normal Operation
When the multifunction switch is placed in the high beam position, voltage is supplied to the instrument cluster (IC) from the central junction box (CJB) through circuit 12 (LG/BK). The instrument cluster (IC) upon receipt of the voltage signal, illuminates the high beam indicator.

This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- Instrument cluster (IC)

Test M: The High Beam Indicator Is Never On

M1-M2:

M3: